1. Remove the end cap located at the left hand side of your RO.

​

2. Remove both bolts off the RO clamps (13ml socket)

​

3. Take the black end cap off.

​

4. Using grip remove old membrane.

​

5. Insert new membrane (non seal end first)

​

6. Put the end cap back on (black brine seal should be end to end with this cap)

​

7. Ensure cap is tight and bolts have been put back on.

​

Important information

​

Inserting your membrane the wrong way will cause instant damage to the membrane and a reaplcement will be needed. This will not be covered by any warrenty included in your item. 

​

Never turn your lever valve to 'off' as this will cut off the drain water to your 'drain port' this will not allow drain water to empty and will be pumped into your tank.

​

​